3.5mm Cortex  |   Cortex S. T.  |   Cancellous Screw  |   Malleolar Screw  |   Shaft Screw  |   4.0 Cancellous-Short-Thread  |   Cancellous-Long-Thread
Cortex Screw Ø 3.5mm
  • Cortex Screw Ø 3.5mm. These screws are used for the fixation of small fragment implants.
  • Larger core dia of the screw provides strength and spherical surface under the head of the screw is for better compression.
  • Self tapping feature eliminates the use of bone tap.
  • Use 2.5mm Drill Bit
Length in mm Codes
Stainless Steel Titanium
10 102.010 Ti-102.010
12 102.012 Ti-102.012
14 102.014 Ti-102.014
16 102.016 Ti-102.016
18 102.018 Ti-102.018
20 102.020 Ti-102.020
22 102.022 Ti-102.022
24 102.024 Ti-102.024
26 102.026 Ti-102.026
28 102.028 Ti-102.028
30 102.030 Ti-102.030
32 102.032 Ti-102.032
34 102.034 Ti-102.034
36 102.036 Ti-102.036
38 102.038 Ti-102.038
40 102.040 Ti-102.040
42 102.042 Ti-102.042
44 102.044 Ti-102.044
46 102.046 Ti-102.046
48 102.048 Ti-102.048
50 102.050 Ti-102.050

Cortex Screw Ø 3.5mm, Self Tapping
  • Cortex Screw Ø 3.5mm are used for the fixation of small fragment implants.
  • Larger Core of the screw provides strength and spherical surface under the head of the screw is for better compression.
  • Self tapping feature eliminates the use of bone tap.
  • Use 2.5mm Drill Bit.
Length in mm Codes
Stainless Steel Titanium
10 102.210 Ti-102.210
12 102.212 Ti-102.212
14 102.214 Ti-102.214
16 102.216 Ti-102.216
18 102.218 Ti-102.218
20 102.220 Ti-102.220
22 102.222 Ti-102.222
24 102.224 Ti-102.224
26 102.226 Ti-102.226
28 102.228 Ti-102.228
30 102.230 Ti-102.230
32 102.232 Ti-102.232
34 102.234 Ti-102.234
36 102.236 Ti-102.236
38 102.238 Ti-102.238
40 102.240 Ti-102.240
42 102.242 Ti-102.242
44 102.244 Ti-102.244
46 102.246 Ti-102.246
48 102.248 Ti-102.248
50 102.250 Ti-102.250

Cancellous Bone Screw Ø 3.5mm
  • Drill Bit: 2.5mm
Length in mm Code - S.S Code - Titanium
Full Thread Short Thread Full Thread Short Thread
10 103.010 103.310 Ti-103.010 Ti-103.310
12 103.012 103.312 Ti-103.012 Ti-103.312
14 103.014 103.314 Ti-103.014 Ti-103.314
16 103.016 103.316 Ti-103.016 Ti-103.316
18 103.018 103.318 Ti-103.018 Ti-103.318
20 103.020 103.320 Ti-103.020 Ti-103.320
22 103.022 103.322 Ti-103.022 Ti-103.322
24 103.024 103.324 Ti-103.024 Ti-103.324
26 103.026 103.326 Ti-103.026 Ti-103.326
28 103.028 103.328 Ti-103.028 Ti-103.328
30 103.030 103.330 Ti-103.030 Ti-103.330
35 103.035 103.335 Ti-103.035 Ti-103.335
40 103.040 103.340 Ti-103.040 Ti-103.340
45 103.045 103.345 Ti-103.045 Ti-103.345
50 103.050 103.350 Ti-103.050 Ti-103.350
55 103.055 103.355 Ti-103.055 Ti-103.355
60 103.060 103.360 Ti-103.060 Ti-103.360

Malleolar Screw Ø 3.5mm
  • Drill Bit for Gliding Hole: 3.5mm
  • Drill Bit: 2.5mm
Length in mm Codes
Stainless Steel Titanium
25 107.225 Ti-107.225
30 107.230 Ti-107.230
35 107.235 Ti-107.235
40 107.240 Ti-107.240
45 107.245 Ti-107.245
50 107.250 Ti-107.250
55 107.255 Ti-107.255
60 107.260 Ti-107.260
65 107.265 Ti-107.265
70 107.270 Ti-107.270

Shaft Screw Ø 3.5mm
  • For low contact dynamic compression plate
  • Drill Bit for Gliding Hole: 3.5mm
  • Drill Bit : 2.5mm
Length in mm Codes
Stainless Steel Titanium
12 113.012 Ti-113.012
14 113.014 Ti-113.014
16 113.016 Ti-113.016
18 113.018 Ti-113.018
20 113.020 Ti-113.020
22 113.022 Ti-113.022
24 113.024 Ti-113.024
26 113.026 Ti-113.026
28 113.028 Ti-113.028
30 113.030 Ti-113.030
32 113.032 Ti-113.032
34 113.034 Ti-113.034
36 113.036 Ti-113.036
38 113.038 Ti-113.038
40 113.040 Ti-113.040
45 113.045 Ti-113.045
50 113.050 Ti-113.050
55 113.055 Ti-113.055
60 113.060 Ti-113.060

Cancellous Bone Screw Ø 4.0mm, Short-thread
  • Cancellous Bone Screw Ø 4.0mm, Short-thread.
  • These screws are used to fix small fragment implants.
  • The cancellous screws are indicated for use in cancellous regions of the bone.
  • The deep and widely spaced cuts increase pull out resistance in soft cancellous bones.
  • Drill Bit: 2.5mm
Length in mm Code - S.S Code - Titanium
Standard Self Tapping Standard Self Tapping
10 104.010 104.210 Ti-104.010 Ti-104.210
12 104.012 104.212 Ti-104.012 Ti-104.212
14 104.014 104.214 Ti-104.014 Ti-104.214
16 104.016 104.216 Ti-104.016 Ti-104.216
18 104.018 104.218 Ti-104.018 Ti-104.218
20 104.020 104.220 Ti-104.020 Ti-104.220
22 104.022 104.222 Ti-104.022 Ti-104.222
24 104.024 104.224 Ti-104.024 Ti-104.224
26 104.026 104.226 Ti-104.026 Ti-104.226
28 104.028 104.228 Ti-104.028 Ti-104.228
30 104.030 104.230 Ti-104.030 Ti-104.230
35 104.035 104.235 Ti-104.035 Ti-104.235
40 104.040 104.240 Ti-104.040 Ti-104.240
45 104.045 104.245 Ti-104.045 Ti-104.245
50 104.050 104.250 Ti-104.050 Ti-104.250
55 104.055 104.255 Ti-104.055 Ti-104.255
60 104.060 104.260 Ti-104.060 Ti-104.260



Cancellous Bone Screw Ø 4.0mm, Full-thread
  • Profile:
  • Not to be used as lag screw.
  • Drill Bit: 2.5mm
Length in mm Code - S.S Code - Titanium
Standard Self Tapping Standard Self Tapping
10 105.010 105.210 Ti-105.010 Ti-105.210
12 105.012 105.212 Ti-105.012 Ti-105.212
14 105.014 105.214 Ti-105.014 Ti-105.214
16 105.016 105.216 Ti-105.016 Ti-105.216
18 105.018 105.218 Ti-105.018 Ti-105.218
18 105.018 105.218 Ti-105.018 Ti-105.218
20 105.020 105.220 Ti-105.020 Ti-105.220
22 105.022 105.222 Ti-105.022 Ti-105.222
24 105.024 105.224 Ti-105.024 Ti-105.224
26 105.026 105.226 Ti-105.026 Ti-105.226
28 105.028 105.228 Ti-105.028 Ti-105.228
30 105.030 105.230 Ti-105.030 Ti-105.230
35 105.035 105.235 Ti-105.035 Ti-105.235
40 105.040 105.240 Ti-105.040 Ti-105.240
45 105.045 105.245 Ti-105.045 Ti-105.245
50 105.050 105.250 Ti-105.050 Ti-105.250
55 105.055 105.255 Ti-105.055 Ti-105.255
60 105.060 105.260 Ti-105.060 Ti-105.260