Straight (Locking Holes)  |   Straight (Round Holes)  |   Curved (Locking Holes)  |   Curved (Round Holes)  |   Safety Lock Screw Ø 3.5mm - Self Tapping  |   Safety Lock Screw Ø 3.5mm Self Tapping and Self Drilling  |   Cortex Screw Ø 3.5mm, Self Tapping  |   Cancellous Bone Screw Ø 4.0mm, Short-thread  |   Cancellous Bone Screw Ø 4.0mm, Full-thread  |   Small Fragment Safety Lock Plates & Screws Set  |   Small Fragment Safety Lock Instruments Set  |   Small Fragment Instrument Set Combo With Standard Instruments & Locking Instruments.
Reconstruction Safety Lock Plate 3.5 - Straight
  • All holes Reconstruction Safety Lock Plate 3.5- straight accommodate Cortex Srew Ø 3.5mm, Self Tapping and safety Lock Screw Ø 3.5mm- Self Tapping.
  • The Reconstruction Safety Lock Plate 3.5- Straight is indicated for fixation of fractures of the clavicle, Scapula, olecranon, humerus, radius, ulna, pelvis, distal tibia, fibula, particularly in osteopenic bone for adult patients.
No. of Holes Stainless Steel
5 SF-144.105
6 SF-144.106
7 SF-144.107
8 SF-144.108
9 SF-144.109
10 SF-144.110
11 SF-144.111
12 SF-144.112
13 SF-144.113
14 SF-144.114
15 SF-144.115
16 SF-144.116
17 SF-144.117
18 SF-144.118
19 SF-144.119
20 SF-144.120
No. of Holes Titanium
5 Ti-SF-144.105
6 Ti-SF-144.106
7 Ti-SF-144.107
8 Ti-SF-144.108
9 Ti-SF-144.109
10 Ti-SF-144.110
11 Ti-SF-144.111
12 Ti-SF-144.112
13 Ti-SF-144.113
14 Ti-SF-144.114
15 Ti-SF-144.115
16 Ti-SF-144.116
17 Ti-SF-144.117
18 Ti-SF-144.118
19 Ti-SF-144.119
20 Ti-SF-144.120

Reconstruction Safety Lock Plate 3.5 Round Holes - Straight
  • Reconstruction Safety Lock Plate 3.5 - Straight is used to fix the pelvic, clavicle and calcaneal fractures.
  • Side cuts on these plates make them more flexible and widens the spectrum of their use.
  • These plates are used with 3.5 mm safety lock screw.
No. of Holes Stainless Steel
5 SF-444.105
6 SF-444.106
7 SF-444.107
8 SF-444.108
9 SF-444.109
10 SF-444.110
11 SF-444.111
12 SF-444.112
13 SF-444.113
14 SF-444.114
15 SF-444.115
16 SF-444.116
17 SF-444.117
18 SF-444.118
19 SF-444.119
20 SF-444.120
No. of Holes Titanium
5 Ti-SF-444.105
6 Ti-SF-444.106
7 Ti-SF-444.107
8 Ti-SF-444.108
9 Ti-SF-444.109
10 Ti-SF-444.110
11 Ti-SF-444.111
12 Ti-SF-444.112
13 Ti-SF-444.113
14 Ti-SF-444.114
15 Ti-SF-444.115
17 Ti-SF-444.117
18 Ti-SF-444.118
19 Ti-SF-444.119
20 Ti-SF-444.120

Reconstruction Safety Lock Plate 3.5 - Curved
  • Reconstruction Safety Lock Plate 3.5 - Straight is used in the reconstruction of the pelvic fractures
  • Side cuts on these plates make them more flexible and widens the spectrum of their use.
  • These plates are used with 3.5mm cortical and 3.5 mm safety lock screw.
No. of Holes Stainless Steel
5 SF-144.205C
6 SF-144.206C
7 SF-144.207C
8 SF-144.208C
9 SF-144.209C
10 SF-144.210C
11 SF-144.211C
12 SF-144.212C
13 SF-144.213C
14 SF-144.214C
16 SF-144.216C
18 SF-144.218C
No. of Holes Titanium
5 Ti-SF-144.205C
6 Ti-SF-144.206C
7 Ti-SF-144.207C
8 Ti-SF-144.208C
9 Ti-SF-144.209C
10 Ti-SF-144.210C
11 Ti-SF-144.211C
12 Ti-SF-144.212C
13 Ti-SF-144.213C
14 Ti-SF-144.214C
16 Ti-SF-144.216C
16 Ti-SF-444.116
18 Ti-SF-144.218C

Reconstruction Safety Lock Plate 3.5 Round Holes - Curved
  • Reconstruction Safety Lock Plate 3.5 - Straight is used in the reconstruction of the pelvic fractures.
  • Side cuts on these plates make them more flexible and widens the spectrum of their use.
  • These plates are used with 3.5 mm safety lock screw.
No. of Holes Stainless Steel
5 SF-444.205C
6 SF-444.206C
7 SF-444.207C
8 SF-444.208C
9 SF-444.209C
10 SF-444.210C
11 SF-444.211C
12 SF-444.212C
13 SF-444.213C
14 SF-444.214C
16 SF-444.216C
18 SF-444.218C
No. of Holes Titanium
5 Ti-SF-444.205C
6 Ti-SF-444.206C
7 Ti-SF-444.207C
8 Ti-SF-444.208C
9 Ti-SF-444.209C
10 Ti-SF-444.210C
11 Ti-SF-444.211C
12 Ti-SF-444.212C
13 Ti-SF-444.213C
14 Ti-SF-444.214C
16 Ti-SF-444.216C
18 Ti-SF-444.218C

Safety Lock Screw Ø 3.5mm - Self Tapping
  • Safety Lock Screw Ø 3.5mm- Self Tapping is used for the fixation of Small Fragment Safety Lock Plate.
  • Larger core dia of the screw provides strength and threaded head for locking in plate.
  • Self tapping eliminates the use of bone tap.
  • Drill Bit: 2.8mm
Length in mm Codes
Stainless Steel Titanium
10 SF-102.210 Ti-SF-102.210
12 SF-102.212 Ti-SF-102.212
14 SF-102.214 Ti-SF-102.214
16 SF-102.216 Ti-SF-102.216
18 SF-102.218 Ti-SF-102.218
20 SF-102.220 Ti-SF-102.220
22 SF-102.222 Ti-SF-102.222
24 SF-102.224 Ti-SF-102.224
26 SF-102.226 Ti-SF-102.226
28 SF-102.228 Ti-SF-102.228
30 SF-102.230 Ti-SF-102.230
32 SF-102.232 Ti-SF-102.232
34 SF-102.234 Ti-SF-102.234
36 SF-102.236 Ti-SF-102.236
38 SF-102.238 Ti-SF-102.238
40 SF-102.240 Ti-SF-102.240
42 SF-102.242 Ti-SF-102.242
44 SF-102.244 Ti-SF-102.244
46 SF-102.246 Ti-SF-102.246
48 SF-102.248 Ti-SF-102.248
50 SF-102.250 Ti-SF-102.250
52 SF-102.252 Ti-SF-102.252
54 SF-102.254 Ti-SF-102.254
56 SF-102.256 Ti-SF-102.256
58 SF-102.258 Ti-SF-102.258
60 SF-102.260 Ti-SF-102.260


Safety Lock Screw Ø 3.5mm Self Tapping and Self Drilling
  • Drill Bit: 2.8mm
Length in mm Codes
Stainless Steel Titanium
10 SF-102.410 Ti-SF-102.410
12 SF-102.412 Ti-SF-102.412
14 SF-102.414 Ti-SF-102.414
16 SF-102.416 Ti-SF-102.416
18 SF-102.418 Ti-SF-102.418
20 SF-102.420 Ti-SF-102.420
22 SF-102.422 Ti-SF-102.422
24 SF-102.424 Ti-SF-102.424
26 SF-102.426 Ti-SF-102.426
28 SF-102.428 Ti-SF-102.428
30 SF-102.430 Ti-SF-102.430
32 SF-102.432 Ti-SF-102.432
34 SF-102.434 Ti-SF-102.434
36 SF-102.436 Ti-SF-102.436
38 SF-102.438 Ti-SF-102.438
40 SF-102.440 Ti-SF-102.440
42 SF-102.442 Ti-SF-102.442
44 SF-102.444 Ti-SF-102.444
46 SF-102.446 Ti-SF-102.446
48 SF-102.448 Ti-SF-102.448
50 SF-102.450 Ti-SF-102.450
52 SF-102.452 Ti-SF-102.452
54 SF-102.454 Ti-SF-102.454
56 SF-102.456 Ti-SF-102.456
58 SF-102.458 Ti-SF-102.458
60 SF-102.460 Ti-SF-102.460

Cortex Screw Ø 3.5mm, Self Tapping
  • Cortex Screw Ø 3.5mm are used for the fixation of small fragment implants.
  • Larger Core of the screw provides strength and spherical surface under the head of the screw is for better compression.
  • Self tapping feature eliminates the use of bone tap.
  • Use 2.5mm Drill Bit.
Length in mm Codes
Stainless Steel Titanium
10 102.210 Ti-102.210
12 102.212 Ti-102.212
14 102.214 Ti-102.214
16 102.216 Ti-102.216
18 102.218 Ti-102.218
20 102.220 Ti-102.220
22 102.222 Ti-102.222
24 102.224 Ti-102.224
26 102.226 Ti-102.226
28 102.228 Ti-102.228
30 102.230 Ti-102.230
32 102.232 Ti-102.232
34 102.234 Ti-102.234
36 102.236 Ti-102.236
38 102.238 Ti-102.238
40 102.240 Ti-102.240
42 102.242 Ti-102.242
44 102.244 Ti-102.244
46 102.246 Ti-102.246
48 102.248 Ti-102.248
50 102.250 Ti-102.250

Cancellous Bone Screw Ø 4.0mm, Short-thread
  • Cancellous Bone Screw Ø 4.0mm, Short-thread.
  • These screws are used to fix small fragment implants.
  • The cancellous screws are indicated for use in cancellous regions of the bone.
  • The deep and widely spaced cuts increase pull out resistance in soft cancellous bones.
  • Drill Bit: 2.5mm
Length in mm Code - S.S Code - Titanium
Standard Self Tapping Standard Self Tapping
10 104.010 104.210 Ti-104.010 Ti-104.210
12 104.012 104.212 Ti-104.012 Ti-104.212
14 104.014 104.214 Ti-104.014 Ti-104.214
16 104.016 104.216 Ti-104.016 Ti-104.216
18 104.018 104.218 Ti-104.018 Ti-104.218
20 104.020 104.220 Ti-104.020 Ti-104.220
22 104.022 104.222 Ti-104.022 Ti-104.222
24 104.024 104.224 Ti-104.024 Ti-104.224
26 104.026 104.226 Ti-104.026 Ti-104.226
28 104.028 104.228 Ti-104.028 Ti-104.228
30 104.030 104.230 Ti-104.030 Ti-104.230
35 104.035 104.235 Ti-104.035 Ti-104.235
40 104.040 104.240 Ti-104.040 Ti-104.240
45 104.045 104.245 Ti-104.045 Ti-104.245
50 104.050 104.250 Ti-104.050 Ti-104.250
55 104.055 104.255 Ti-104.055 Ti-104.255
60 104.060 104.260 Ti-104.060 Ti-104.260



Cancellous Bone Screw Ø 4.0mm, Full-thread
  • Profile:
  • Not to be used as lag screw.
  • Drill Bit: 2.5mm
Length in mm Code - S.S Code - Titanium
Standard Self Tapping Standard Self Tapping
10 105.010 105.210 Ti-105.010 Ti-105.210
12 105.012 105.212 Ti-105.012 Ti-105.212
14 105.014 105.214 Ti-105.014 Ti-105.214
16 105.016 105.216 Ti-105.016 Ti-105.216
18 105.018 105.218 Ti-105.018 Ti-105.218
18 105.018 105.218 Ti-105.018 Ti-105.218
20 105.020 105.220 Ti-105.020 Ti-105.220
22 105.022 105.222 Ti-105.022 Ti-105.222
24 105.024 105.224 Ti-105.024 Ti-105.224
26 105.026 105.226 Ti-105.026 Ti-105.226
28 105.028 105.228 Ti-105.028 Ti-105.228
30 105.030 105.230 Ti-105.030 Ti-105.230
35 105.035 105.235 Ti-105.035 Ti-105.235
40 105.040 105.240 Ti-105.040 Ti-105.240
45 105.045 105.245 Ti-105.045 Ti-105.245
50 105.050 105.250 Ti-105.050 Ti-105.250
55 105.055 105.255 Ti-105.055 Ti-105.255
60 105.060 105.260 Ti-105.060 Ti-105.260


Small Fragment Safety Lock Plates & Screws Set
AS136 Small Fragment Safety Lock Plates & Screws Set.
Set Consisting of : Units
SF-102.210 to 224 - Safety Lock Screw Ø 3.5mm, SS, Self Tapping,Length 10, 12, 14, 16, 18, 20, 22 & 24mm (2 each) 16
SF-102.226 to 242 - Safety Lock Screw Ø 3.5mm, SS, Self Tapping,Length 26, 28, 30, 32, 34, 36, 38, 40 & 42mm (3 each) 27
SF-102.244 to 260 - Safety Lock Screw Ø 3.5mm, SS, Self Tapping,Length 44, 46, 48, 50, 52, 56 & 60mm (2 each) 14
SF-147.104 to 110 - LC-DCP Safety Lock Plate 3.5, SS 4, 5, 6, 7, 8, 9 & 10 Holes (1 each) 7
SF-142.103L to 105L - Safety Lock 'T' Plate 3.5 - Oblique Angled, SS, Left,3, 4 & 5 Holes (1 each) 3
SF-142.103R to 105R - Safety Lock 'T' Plate 3.5 - Oblique Angled, SS, Right,3, 4 & 5 Holes (1 each) 3
SF-144.106 to 110 - Reconstruction Safety Lock Plate 3.5 - Straight, SS,6, 8 &10 Holes (1 each) 3
SF-146.104 to 106 - Cloverleaf Safety Lock Plate 3.5, SS,4, 5 & 6 Holes (1 each) 3
306.010 - Quick Coupling Handle ( T- Type), SS 1
301.060 - Screws Driver Shaft Q.C. End, 2.5mm Tip, SS 1
AS432.001 - Drill Bit Ø 2.8mm, Length 165mm,Calibrated, 2-flute, for Quick Coupling 2
AS432.005 - 2.8mm Drill Sleeve for 3.5mm Safety Lock Screws 2
AS432.009 - Torque Limiting Screw Driver, 2.5mm Tip 1
AS432.017 - HSS Drill Bit Ø 2.5mm 2
AS432.021 - Extraction Screw (Left Hand Thread),Conical, for Screws Ø 3.5mm 1
AS432.025 - Centering Sleeve for Kirschner Wire Ø 1.2mm, Length 85mm 1
906.001 - Empty Container  

Small Fragment Safety Lock Instruments Set
AS432 Small Fragment Safety Lock Instruments Set
Set Consisting of : Units
AS432.001 - Drill Bit Ø 2.8mm, Length 165mm, Calibrated, 2-flute, for Quick Coupling 2
AS432.005 - 2.8mm Drill Sleeve for 3.5mm Safety Lock Screws 2
AS432.009 - Torque Limiting Screw Driver, 2.5mm Tip 1
AS432.013 - T-Handle for Quick Coupling 1
AS432.017 - HSS Drill Bit Ø 2.5mm (Blue Coating) 2
AS432.021 - Extraction Screw (Left Hand Thread), Conical, for Screws Ø 3.5mm 1
AS432.025 - Centering Sleeve for Kirschner Wire Ø 1.2mm, Length 85mm 1
432.000 - Empty Container  
Optional Instruments (To be Ordered Separately)  
AS432.030 - Torque Limiting Screw Driver, 1.5mm Tip. 1
AS432.031 - Drill Bit Ø 2.0mm, Length 150mm, 2-flute for Quick Coupling 1
AS432.035 - 2.0mm Drill Sleeve for 2.4/2.7mm Safety Locking Screws 1

Small Fragment Instrument Set Combo With Standard Instruments & Locking Instruments.
AS140 Small Fragment Instrument Set Combo With Standard Instruments & Locking Instruments.
Set Consisting of : Units
Standard Instruments  
260.250 - Drill Bit 2.5mm Dia 2
260.350 - Drill Bit 3.5mm Dia 2
305.020 - Counter Sink for 3.5, 4.0mm Screws (6.0mm Head) 1
264.025 - Tap of 3.5mm Cortex Screw 2
264.038 - Tap of 4.0mm Cancellous Screw 2
306.010 - Quick Coupling Handle (T-Type) 1
307.060 - Drill & Tap Sleeve Combined 3.5/2.5mm 1
307.090 - Insert Drill Sleeve 2.5mm / 3.5mm 1
301.060 - Small Hexagonal Screw Driver Shaft 1
301.040 - Small Hexagonal Screw Driver 1
303.010 - Depth Gauge Small 1
302.010 - Small Plate Bender for Plates 2.7 & 3.5mm 1
340.020 - Self Centering Bone Holding Forceps- 190mm 1
379.015 - Hohman Retractors, Small, 8mm Wide, 160mm 2
381.012 - Periosteal Elevator, Straight/Curved 12mm 1
379.020 - Hohman Retractors, 15mm Wide, 160mm 2
341.025 - Reduction Forceps, Serrated - 140mm 1
342.035 - Reduction Forceps, Pointed - 140mm 1
304.010 - Neutral and Loaded Drill Guide (Small) 1
Locking Instruments  
AS432.001 - Drill Bit Ø 2.8mm, Length 165mm, Calibrated, 2-flute, for Quick Coupling 2
AS432.005 - 2.8mm Drill Sleeve for 3.5mm Safety Lock Screws 2
AS432.009 - Torque limiting Screw Driver, 2.5mm Tip 1
AS432.021 - Extraction Screw (Left Hand Thread), Conical, for Screws Ø 3.5mm 1
AS432.025 - Centering Sleeve for Kirschner Wire Ø 1.2mm, Length 85mm 1
AS140.000 - Empty Container  
Optional Instruments (To be Ordered Separately)  
AS432.030 - Torque Limiting Screw Driver, 1.5mm Tip. 1
AS432.031 - Drill Bit Ø 2.0mm, Length 150mm, 2-flute for Quick Coupling 1
AS432.035 - 2.0mm Drill Sleeve for 2.4/2.7mm Safety Locking Screws 1
>