Proximal Humerus Safety Lock Plate 3.5 Filos - Proximal Humerus Safety Lock Plate 3.5 - Standard Filos - Proximal Humerus Safety Lock Plate 3.5 - Long Safety Lock Screw Ø 3.5mm - Self Tapping Safety Lock Screw Ø 3.5mm Self Tapping and Self Drilling Cortex Screw Ø 3.5mm, Self Tapping Cancellous Bone Screw Ø 4.0mm, Short-thread Cancellous Bone Screw Ø 4.0mm, Full-thread Small Fragment Safety Lock Instruments Set Small Fragment Instrument Set Combo With Standard Instruments & Locking Instruments.
Proximal Humerus Safety Lock Plate 3.5

Locking Proximal Humerus Plate is used for complex and unstable fractures.

Indications – Proximal Humerus
  • Multifragmentary (dislocated) fractures requiring open reduction
  • Unstable subcapital fractures
  • Subcapital pseudarthrosis
  • Osteotomies

Suture holes The fixation of additional wire loops or sutures attached to the tubercles (in 3- or 4-fragment fractures) neutralises the muscle tension and helps to maintain reduction.

The head of a plate allows only 3.5 mm Safety Lock Screws and the shaft of the plate allows both 3.5 mm Safety Lock and Cortical screws.

No. of Holes Stainless Steel
5 SF-640.005
6 SF-640.006
7 SF-640.007
8 SF-640.008
No. of Holes Titanium
5 Ti-SF-640.005
6 Ti-SF-640.006
7 Ti-SF-640.007
8 Ti-SF-640.008

Filos - Proximal Humerus Safety Lock Plate 3.5 - Standard
  • Filos- Proximal Humerus Safety Lock Plate 3.5 - Standard is used in case of dislocation of 2-, 3-, & 4-fragment fracture of the proximal humerus, including fracture involving osteopenic bone & if there are pseudarthroses in the proximal humerus or if there are osteotomies in the proximal humerus (use filos long if fracture extended)
  • The Filos - Proximal Humerus safety Plate 3.5 - Standard is designed to match the anatomy of the proximal humerus. The plate is separately used for the right and left humerus.
  • The Filos - Proximal Humerus safety Plate 3.5 - Standard, Head Region of the plate accommodates Safety Lock Screw Ø 3.5 mm- Self Tapping and Shaft region accommodates both Cortex Screw Ø 3.5 mm-Self Tapping and Safety Lock Screw Ø 3.5 mm-Self Tapping
  • The Filos - Proximal Humerus safety Plate 3.5 - Standard is indicated for fractures, fracture-dislocations, osteotomies, and non-unions of the proximal humerus, particularly in osteopenic bone.
No. of Holes Stainless Steel
3 SF-642.003
4 SF-642.004
5 SF-642.005
No. of Holes Titanium
3 Ti-SF-642.003
4 Ti-SF-642.004
5 Ti-SF-642.005

Filos - Proximal Humerus Safety Lock Plate 3.5 - Long
FILOS LONG - The anatomic fixation system for the proximal humerus.
  • Angular stability, Anatomic design, Dedicated screw.
  • 9 proximal screw holes for Safety Locking Screws Ø 3.5 mm enable an angular stable construct to enhance the grip in multi fragment fractures.
  • Anatomic reduction: Fracture reduction and fixation to restore anatomical relationships.
  • Stable fixation: Stability by fixation or splintage, as the personality of the fracture and the injury, requires. The products optimize purchase for maximum compression and stability.
  • Preservation of blood supply: Preservation of the blood supply to soft tissue and bone by careful handling, atraumatic surgery. A limited-contact plate design reduces plate-to-bone contact and helps to preserve the periosteal blood supply.

INDICATIONS: FILOS LONG
  • Dislocated two-, three-, and four-fragment fractures of the proximal humerus.
  • Pseudarthroses in the proximal humerus
  • The long plate is required for fractures extending to the proximal diaphysis.
No. of Holes Stainless Steel
5 SF-642.205
6 SF-642.206
8 SF-642.208
10 SF-642.210
12 SF-642.212
No. of Holes Titanium
5 Ti-SF-642.205
6 Ti-SF-642.206
8 Ti-SF-642.208
10 Ti-SF-642.210
12 Ti-SF-642.212

Safety Lock Screw Ø 3.5mm - Self Tapping
  • Safety Lock Screw Ø 3.5mm- Self Tapping is used for the fixation of Small Fragment Safety Lock Plate.
  • The larger core dia of the screw provides strength and a threaded head for locking in the plate.
  • Self-tapping eliminates the use of the bone tap.
  • Drill Bit: 2.8mm
Length in mm Codes
Stainless Steel Titanium
10 SF-102.210 Ti-SF-102.210
12 SF-102.212 Ti-SF-102.212
14 SF-102.214 Ti-SF-102.214
16 SF-102.216 Ti-SF-102.216
18 SF-102.218 Ti-SF-102.218
20 SF-102.220 Ti-SF-102.220
22 SF-102.222 Ti-SF-102.222
24 SF-102.224 Ti-SF-102.224
26 SF-102.226 Ti-SF-102.226
28 SF-102.228 Ti-SF-102.228
30 SF-102.230 Ti-SF-102.230
32 SF-102.232 Ti-SF-102.232
34 SF-102.234 Ti-SF-102.234
36 SF-102.236 Ti-SF-102.236
38 SF-102.238 Ti-SF-102.238
40 SF-102.240 Ti-SF-102.240
42 SF-102.242 Ti-SF-102.242
44 SF-102.244 Ti-SF-102.244
46 SF-102.246 Ti-SF-102.246
48 SF-102.248 Ti-SF-102.248
50 SF-102.250 Ti-SF-102.250
52 SF-102.252 Ti-SF-102.252
54 SF-102.254 Ti-SF-102.254
56 SF-102.256 Ti-SF-102.256
58 SF-102.258 Ti-SF-102.258
60 SF-102.260 Ti-SF-102.260


Safety Lock Screw Ø 3.5mm Self Tapping and Self Drilling
  • Drill Bit: 2.8mm
Length in mm Codes
Stainless Steel Titanium
10 SF-102.410 Ti-SF-102.410
12 SF-102.412 Ti-SF-102.412
14 SF-102.414 Ti-SF-102.414
16 SF-102.416 Ti-SF-102.416
18 SF-102.418 Ti-SF-102.418
20 SF-102.420 Ti-SF-102.420
22 SF-102.422 Ti-SF-102.422
24 SF-102.424 Ti-SF-102.424
26 SF-102.426 Ti-SF-102.426
28 SF-102.428 Ti-SF-102.428
30 SF-102.430 Ti-SF-102.430
32 SF-102.432 Ti-SF-102.432
34 SF-102.434 Ti-SF-102.434
36 SF-102.436 Ti-SF-102.436
38 SF-102.438 Ti-SF-102.438
40 SF-102.440 Ti-SF-102.440
42 SF-102.442 Ti-SF-102.442
44 SF-102.444 Ti-SF-102.444
46 SF-102.446 Ti-SF-102.446
48 SF-102.448 Ti-SF-102.448
50 SF-102.450 Ti-SF-102.450
52 SF-102.452 Ti-SF-102.452
54 SF-102.454 Ti-SF-102.454
56 SF-102.456 Ti-SF-102.456
58 SF-102.458 Ti-SF-102.458
60 SF-102.460 Ti-SF-102.460

Cortex Screw Ø 3.5mm, Self Tapping
  • Cortex Screw Ø 3.5mm is used for the fixation of small fragment implants.
  • A larger Core of the screw provides strength and a spherical surface under the head of the screw is for better compression.
  • The self-tapping feature eliminates the use of the bone tap.
  • Use 2.5mm Drill Bit.
Length in mm Codes
Stainless Steel Titanium
10 102.210 Ti-102.210
12 102.212 Ti-102.212
14 102.214 Ti-102.214
16 102.216 Ti-102.216
18 102.218 Ti-102.218
20 102.220 Ti-102.220
22 102.222 Ti-102.222
24 102.224 Ti-102.224
26 102.226 Ti-102.226
28 102.228 Ti-102.228
30 102.230 Ti-102.230
32 102.232 Ti-102.232
34 102.234 Ti-102.234
36 102.236 Ti-102.236
38 102.238 Ti-102.238
40 102.240 Ti-102.240
42 102.242 Ti-102.242
44 102.244 Ti-102.244
46 102.246 Ti-102.246
48 102.248 Ti-102.248
50 102.250 Ti-102.250

Cancellous Bone Screw Ø 4.0mm, Short-thread
  • Cancellous Bone Screw Ø 4.0mm, Short-thread.
  • These screws are used to fix small fragment implants.
  • The cancellous screws are indicated for use in cancellous regions of the bone.
  • The deep and widely spaced cuts increase pull-out resistance in soft cancellous bones.
  • Drill Bit: 2.5mm
Length in mm Code - S.S Code - Titanium
Standard Self Tapping Standard Self Tapping
10 104.010 104.210 Ti-104.010 Ti-104.210
12 104.012 104.212 Ti-104.012 Ti-104.212
14 104.014 104.214 Ti-104.014 Ti-104.214
16 104.016 104.216 Ti-104.016 Ti-104.216
18 104.018 104.218 Ti-104.018 Ti-104.218
20 104.020 104.220 Ti-104.020 Ti-104.220
22 104.022 104.222 Ti-104.022 Ti-104.222
24 104.024 104.224 Ti-104.024 Ti-104.224
26 104.026 104.226 Ti-104.026 Ti-104.226
28 104.028 104.228 Ti-104.028 Ti-104.228
30 104.030 104.230 Ti-104.030 Ti-104.230
35 104.035 104.235 Ti-104.035 Ti-104.235
40 104.040 104.240 Ti-104.040 Ti-104.240
45 104.045 104.245 Ti-104.045 Ti-104.245
50 104.050 104.250 Ti-104.050 Ti-104.250
55 104.055 104.255 Ti-104.055 Ti-104.255
60 104.060 104.260 Ti-104.060 Ti-104.260



Cancellous Bone Screw Ø 4.0mm, Full-thread
  • Profile:
  • Not to be used as lag screw.
  • Drill Bit: 2.5mm
Length in mm Code - S.S Code - Titanium
Standard Self Tapping Standard Self Tapping
10 105.010 105.210 Ti-105.010 Ti-105.210
12 105.012 105.212 Ti-105.012 Ti-105.212
14 105.014 105.214 Ti-105.014 Ti-105.214
16 105.016 105.216 Ti-105.016 Ti-105.216
18 105.018 105.218 Ti-105.018 Ti-105.218
18 105.018 105.218 Ti-105.018 Ti-105.218
20 105.020 105.220 Ti-105.020 Ti-105.220
22 105.022 105.222 Ti-105.022 Ti-105.222
24 105.024 105.224 Ti-105.024 Ti-105.224
26 105.026 105.226 Ti-105.026 Ti-105.226
28 105.028 105.228 Ti-105.028 Ti-105.228
30 105.030 105.230 Ti-105.030 Ti-105.230
35 105.035 105.235 Ti-105.035 Ti-105.235
40 105.040 105.240 Ti-105.040 Ti-105.240
45 105.045 105.245 Ti-105.045 Ti-105.245
50 105.050 105.250 Ti-105.050 Ti-105.250
55 105.055 105.255 Ti-105.055 Ti-105.255
60 105.060 105.260 Ti-105.060 Ti-105.260


Small Fragment Safety Lock Instruments Set
AS432 Small Fragment Safety Lock Instruments Set
Set Consisting of : Units
AS432.001 - Drill Bit Ø 2.8mm, Length 165mm, Calibrated, 2-flute, for Quick Coupling 2
AS432.005 - 2.8mm Drill Sleeve for 3.5mm Safety Lock Screws 2
AS432.009 - Torque Limiting Screw Driver, 2.5mm Tip 1
AS432.013 - T-Handle for Quick Coupling 1
AS432.017 - HSS Drill Bit Ø 2.5mm (Blue Coating) 2
AS432.021 - Extraction Screw (Left Hand Thread), Conical, for Screws Ø 3.5mm 1
AS432.025 - Centering Sleeve for Kirschner Wire Ø 1.2mm, Length 85mm 1
432.000 - Empty Container  
Optional Instruments (To be Ordered Separately)  
AS432.030 - Torque Limiting Screw Driver, 1.5mm Tip. 1
AS432.031 - Drill Bit Ø 2.0mm, Length 150mm, 2-flute for Quick Coupling 1
AS432.035 - 2.0mm Drill Sleeve for 2.4/2.7mm Safety Locking Screws 1

Small Fragment Instrument Set Combo With Standard Instruments & Locking Instruments.
AS140 Small Fragment Instrument Set Combo With Standard Instruments & Locking Instruments.
Set Consisting of : Units
Standard Instruments  
260.250 - Drill Bit 2.5mm Dia 2
260.350 - Drill Bit 3.5mm Dia 2
305.020 - Counter Sink for 3.5, 4.0mm Screws (6.0mm Head) 1
264.025 - Tap of 3.5mm Cortex Screw 2
264.038 - Tap of 4.0mm Cancellous Screw 2
306.010 - Quick Coupling Handle (T-Type) 1
307.060 - Drill & Tap Sleeve Combined 3.5/2.5mm 1
307.090 - Insert Drill Sleeve 2.5mm / 3.5mm 1
301.060 - Small Hexagonal Screw Driver Shaft 1
301.040 - Small Hexagonal Screw Driver 1
303.010 - Depth Gauge Small 1
371.000 - Sharp Hook 1
302.010 - Small Plate Bender for Plates 2.7 & 3.5mm 1
340.020 - Self Centering Bone Holding Forceps- 190mm 1
379.015 - Hohman Retractors, Small, 8mm Wide, 160mm 2
381.012 - Periosteal Elevator, Straight/Curved 12mm 1
379.020 - Hohman Retractors, 15mm Wide, 160mm 2
341.025 - Reduction Forceps, Serrated - 140mm 1
342.035 - Reduction Forceps, Pointed - 140mm 1
304.010 - Neutral and Loaded Drill Guide (Small) 1
Locking Instruments  
AS432.001 - Drill Bit Ø 2.8mm, Length 165mm, Calibrated, 2-flute, for Quick Coupling 2
AS432.005 - 2.8mm Drill Sleeve for 3.5mm Safety Lock Screws 2
AS432.009 - Torque limiting Screw Driver, 2.5mm Tip 1
AS432.021 - Extraction Screw (Left Hand Thread), Conical, for Screws Ø 3.5mm 1
AS432.025 - Centering Sleeve for Kirschner Wire Ø 1.2mm, Length 85mm 1
140.000 - Empty Container  
Optional Instruments (To be Ordered Separately)  
AS432.030 - Torque Limiting Screw Driver, 1.5mm Tip.  
AS432.031 - Drill Bit Ø 2.0mm, Length 150mm, 2-flute for Quick Coupling  
AS432.035 - 2.0mm Drill Sleeve for 2.4/2.7mm Safety Locking Screws  
>