Dorsolateral  |   Dorsolateral with Lateral Support  |   Distal Medial  |   Metaphyseal  |   Safety Lock Screw Ø 2.7mm - Self Tapping  |   Safety Lock Screw Ø 3.5mm - Self Tapping  |   Safety Lock Screw Ø 3.5mm Self Tapping and Self Drilling  |   Cortex Screw Ø 3.5mm, Self Tapping  |   Cancellous Bone Screw Ø 4.0mm, Short-thread  |   Cancellous Bone Screw Ø 4.0mm, Full-thread  |   Small Fragment Safety Lock Instruments Set  |   Small Fragment Instrument Set Combo
Distal Humerus Safety Lock Plate 2.7/3.5, Dorsolateral
  • The Distal Humerus Safety Lock Plate 2.7/3.5, Dorsolateral is available in various lengths. There are two version of the plate left and right separately designed for right and left humerus. The plates are pre-shaped to match the anatomy of the distal humerus with a limited contact low profile design.
  • The Head Region of the plate accommodates safety Lock Screw Ø 2.7 mm-Self Tapping and shaft region accommodates both cortex screw Ø 3.5 mm-self tapping and Safety Lock screw Ø 3.5 mm-self tapping
  • The Distal Humerus safety Lock Plate 2.7/3.5, Dorsolateral is indicated for intraarticular fractures of the distal humerus, comminuted supracondylar fractures, osteotormies, and non-unions of the distal humerus.
No. of Holes Stainless Steel
Left Right
3 SF-601.03L SF-601.03R
5 SF-601.05L SF-601.05R
7 SF-601.07L SF-601.07R
9 SF-601.09L SF-601.09R
14 SF-601.14L SF-601.14R
No. of Holes Titanium
Left Right
3 Ti-SF-601.03L Ti-SF-601.03R
5 Ti-SF-601.05L Ti-SF-601.05R
7 Ti-SF-601.07L Ti-SF-601.07R
9 Ti-SF-601.09L Ti-SF-601.09R
14 Ti-SF-601.14L Ti-SF-601.14R

Distal Humerus Safety Lock Plate 2.7/3.5, Dorsolateral with Lateral Support
  • The Distal Humerus Safety Lock Plate 2.7/3.5, Dorsolateral with Lateral Support is available in various lengths. There are two version of the plate left and right separately designed for right and left humerus. The plates are pre-shaped to match the anatomy of the distal humerus with a limited contact low profile design.
  • The Head Region of the plate accommodates Safety Lock Screw Φ 2.7 mm-Self Tapping and Shaft Region accommodates both Cortex Screw Φ 3.5 mm - Self Tapping and Safety Lock Screw Φ 3.5 mm - Self Tapping
  • The Distal Humerus safety Lock Plate 2.7/3.5, Dorsolateral with Lateral Support is indicated for intraarticular fractures of the Distal Humerus, comminuted supracondylar fractures, osteotormies, and non-unions of the Distal Humerus.
No. of Holes Stainless Steel
Left Right
3 SF-603.03L SF-603.03R
5 SF-603.05L SF-603.05R
7 SF-603.07L SF-603.07R
7 SF-603.07L SF-603.07R
9 SF-603.09L SF-603.09R
14 SF-603.14L SF-603.14R
No. of Holes Titanium
Left Right
3 Ti-SF-603.03L Ti-SF-603.03R
5 Ti-SF-603.05L Ti-SF-603.05R
7 Ti-SF-603.07L Ti-SF-603.07R
7 Ti-SF-603.07L Ti-SF-603.07R
9 Ti-SF-603.09L Ti-SF-603.09R
14 Ti-SF-603.14L Ti-SF-603.14R

Distal Humerus Safety Lock Plate 3.5, Extra-Articular

Indications: The 3.5 mm LCP Extra-articular Distal Humerus Plates are indicated for fractures of the distal humerus.

Plate features
  • Left and right plates are anatomically contoured to match the posterolateral distal humerus.
  • Two most distal holes are angled toward the capitulum and trochlea.
  • Plate head tapered to minimize soft tissue irritation.
  • A limited-contact plate design reduces plate-to-bone contact and helps to preserve the periosteal blood supply.

Anatomic reduction: Fracture reduction and fixation to restore anatomical relationships.

Stable fixation: Fracture fixation providing absolute or relative stability, as required by the patient, the injury, and the personality of the fracture.

Early, active mobilization: Early and safe mobilization and rehabilitation of the injured part and the patient as a whole.

Preservation of blood supply: Preservation of the blood supply to soft tissues and bone by gentle reduction techniques and careful handling.

No. of Holes Stainless Steel
Left Right
4 SF-612.04L SF-612.04R
6 SF-612.06L SF-612.06R
7 SF-612.07L SF-612.07R
8 SF-612.08L SF-612.08R
10 SF-612.10L SF-612.10R
12 SF-612.12L SF-612.12R
14 SF-612.14L SF-612.14R
No. of Holes Titanium
Left Right
4 TI-SF-612.04L TI-SF-612.04R
6 TI-SF-612.06L TI-SF-612.06R
7 TI-SF-601.07L TI-SF-601.07R
8 TI-SF-612.08L TI-SF-612.08R
10 TI-SF-612.10L TI-SF-612.10R
12 TI-SF-612.12L TI-SF-612.12R
14 TI-SF-612.14L TI-SF-612.14R

Medial Distal Humerus Safety Lock Plate 2.7/3.5
  • The Medial Distal Humerus Safety Lock Plate 2.7/3.5, is available in various lengths. There are two version of the plate left and right separately designed for right and left humerus. The plates are pre-shaped to match the anatomy of the distal humerus with a limited contact low profile design.
  • The Head Region of the plate accommodates safety Lock Screw Φ 2.7 mm-Self Tapping and shaft region accommodates both cortex screw Φ 3.5 mm - Self Tapping and Safety Lock Screw Φ 3.5 mm - Self Tapping
  • The Medial Distal Humerus safety Lock Plate 2.7/3.5, Left Direction is indicated for intraarticular fractures of the Distal Humerus, comminuted supracondylar fractures, osteotormies, and non-unions of the Distal Humerus.
No. of Holes Stainless Steel
Left Right
3 SF-604.03L SF-604.03R
5 SF-604.05L SF-604.05R
7 SF-604.07L SF-604.07R
9 SF-604.09L SF-604.09R
14 SF-604.14L SF-604.14R
No. of Holes Titanium
Left Right
3 Ti-SF-604.03L Ti-SF-604.03R
5 Ti-SF-604.05L Ti-SF-604.05R
7 Ti-SF-604.07L Ti-SF-604.07R
9 Ti-SF-604.09L Ti-SF-604.09R
14 Ti-SF-604.14L Ti-SF-604.14R

Metaphyseal Safety Lock Plate 3.5 for Distal, Medial Humerus
Plate Features:

Anatomically precontoured plate: plateThe anatomical shape of the plate has been especially designed to fit the complex shape of the medial part of the distal humerus.

Thinned plate profile: The distal part of the plate is tapered to preserve the thin soft tissue envelope of the distal humerus.

Notches on the plate shaft: The notches allow for additional lateral bending of the plate to deal with the wide anatomical variance of the humeri. The plate can be bent at max. 4° at each notch.

Optimal distal application of the locking screws: The distal end of the plate has been equipped with three threaded round holes intended for angular stable locking screws. Their specific orientation in combination with the thin plate profile allows stable fixation of the condylar zone and the articular surface while fully pre-serving the soft tissue, without any risk of screws penetrating the articulation.

Increased hole density for improved anchorage:The three distal LCP round holes allow inserting the screws closer to one another and hence an optimal fixation of the bone fragments.
The elongated hole in the shaft facilitates fine tuning of the reduction and plate positioning in the longitudinal axis.
Improved vascularization of the bone due to plate undercuts that reduce the plate-to-bone contact.

Indications:

Metaphyseal Safety Lock Plate 3.5 for Distal, Medial Humerus is an anatomically precontoured plate that permits an optimal treatment of juxta-articular distal humerus fractures. It takes into account the following peculiarities of the distal humerus: Thin soft-tissue envelope & complex shape of the bone.

No. of Holes Stainless Steel
7 SF-611.07
9 SF-611.09
11 SF-611.11
13 SF-611.13
15 SF-611.15
No. of Holes Titanium
7 Ti-SF-611.07
9 Ti-SF-611.09
11 Ti-SF-611.11
13 Ti-SF-611.13
15 Ti-SF-611.15

Safety Lock Screw Ø 2.7mm - Self Tapping
  • Safety Lock Screw Ø 2.7mm - Self Tapping is used for the Fixation of Small Fragment Safety Lock Plate.
  • Larger core dia of the screw provides strength and threaded head for locking in plate.
  • Self tapping feature eliminates the use of bone tap.
  • Drill Bit: 2.0mm
Length in mm Codes
Stainless Steel Titanium
20 SF-101.420 Ti-SF-101.420
22 SF-101.422 Ti-SF-101.422
24 SF-101.424 Ti-SF-101.424
26 SF-101.426 Ti-SF-101.426
28 SF-101.428 Ti-SF-101.428
30 SF-101.430 Ti-SF-101.430
32 SF-101.432 Ti-SF-101.432
34 SF-101.434 Ti-SF-101.434
36 SF-101.436 Ti-SF-101.436
38 SF-101.438 Ti-SF-101.438
40 SF-101.440 Ti-SF-101.440
42 SF-101.442 Ti-SF-101.442
44 SF-101.444 Ti-SF-101.444
46 SF-101.446 Ti-SF-101.446
48 SF-101.448 Ti-SF-101.448
50 SF-101.450 Ti-SF-101.450
52 SF-101.452 Ti-SF-101.452
54 SF-101.454 Ti-SF-101.454
56 SF-101.456 Ti-SF-101.456
58 SF-101.458 Ti-SF-101.458
60 SF-101.460 Ti-SF-101.460


Safety Lock Screw Ø 3.5mm - Self Tapping
  • Safety Lock Screw Ø 3.5mm- Self Tapping is used for the fixation of Small Fragment Safety Lock Plate.
  • Larger core dia of the screw provides strength and threaded head for locking in plate.
  • Self tapping eliminates the use of bone tap.
  • Drill Bit: 2.8mm
Length in mm Codes
Stainless Steel Titanium
10 SF-102.210 Ti-SF-102.210
12 SF-102.212 Ti-SF-102.212
14 SF-102.214 Ti-SF-102.214
16 SF-102.216 Ti-SF-102.216
18 SF-102.218 Ti-SF-102.218
20 SF-102.220 Ti-SF-102.220
22 SF-102.222 Ti-SF-102.222
24 SF-102.224 Ti-SF-102.224
26 SF-102.226 Ti-SF-102.226
28 SF-102.228 Ti-SF-102.228
30 SF-102.230 Ti-SF-102.230
32 SF-102.232 Ti-SF-102.232
34 SF-102.234 Ti-SF-102.234
36 SF-102.236 Ti-SF-102.236
38 SF-102.238 Ti-SF-102.238
40 SF-102.240 Ti-SF-102.240
42 SF-102.242 Ti-SF-102.242
44 SF-102.244 Ti-SF-102.244
46 SF-102.246 Ti-SF-102.246
48 SF-102.248 Ti-SF-102.248
50 SF-102.250 Ti-SF-102.250
52 SF-102.252 Ti-SF-102.252
54 SF-102.254 Ti-SF-102.254
56 SF-102.256 Ti-SF-102.256
58 SF-102.258 Ti-SF-102.258
60 SF-102.260 Ti-SF-102.260


Safety Lock Screw Ø 3.5mm Self Tapping and Self Drilling
  • Drill Bit: 2.8mm
Length in mm Codes
Stainless Steel Titanium
10 SF-102.410 Ti-SF-102.410
12 SF-102.412 Ti-SF-102.412
14 SF-102.414 Ti-SF-102.414
16 SF-102.416 Ti-SF-102.416
18 SF-102.418 Ti-SF-102.418
20 SF-102.420 Ti-SF-102.420
22 SF-102.422 Ti-SF-102.422
24 SF-102.424 Ti-SF-102.424
26 SF-102.426 Ti-SF-102.426
28 SF-102.428 Ti-SF-102.428
30 SF-102.430 Ti-SF-102.430
32 SF-102.432 Ti-SF-102.432
34 SF-102.434 Ti-SF-102.434
36 SF-102.436 Ti-SF-102.436
38 SF-102.438 Ti-SF-102.438
40 SF-102.440 Ti-SF-102.440
42 SF-102.442 Ti-SF-102.442
44 SF-102.444 Ti-SF-102.444
46 SF-102.446 Ti-SF-102.446
48 SF-102.448 Ti-SF-102.448
50 SF-102.450 Ti-SF-102.450
52 SF-102.452 Ti-SF-102.452
54 SF-102.454 Ti-SF-102.454
56 SF-102.456 Ti-SF-102.456
58 SF-102.458 Ti-SF-102.458
60 SF-102.460 Ti-SF-102.460

Cortex Screw Ø 3.5mm, Self Tapping
  • Cortex Screw Ø 3.5mm are used for the fixation of small fragment implants.
  • Larger Core of the screw provides strength and spherical surface under the head of the screw is for better compression.
  • Self tapping feature eliminates the use of bone tap.
  • Use 2.5mm Drill Bit.
Length in mm Codes
Stainless Steel Titanium
10 102.210 Ti-102.210
12 102.212 Ti-102.212
14 102.214 Ti-102.214
16 102.216 Ti-102.216
18 102.218 Ti-102.218
20 102.220 Ti-102.220
22 102.222 Ti-102.222
24 102.224 Ti-102.224
26 102.226 Ti-102.226
28 102.228 Ti-102.228
30 102.230 Ti-102.230
32 102.232 Ti-102.232
34 102.234 Ti-102.234
36 102.236 Ti-102.236
38 102.238 Ti-102.238
40 102.240 Ti-102.240
42 102.242 Ti-102.242
44 102.244 Ti-102.244
46 102.246 Ti-102.246
48 102.248 Ti-102.248
50 102.250 Ti-102.250

Cancellous Bone Screw Ø 4.0mm, Short-thread
  • Cancellous Bone Screw Ø 4.0mm, Short-thread.
  • These screws are used to fix small fragment implants.
  • The cancellous screws are indicated for use in cancellous regions of the bone.
  • The deep and widely spaced cuts increase pull out resistance in soft cancellous bones.
  • Drill Bit: 2.5mm
Length in mm Code - S.S Code - Titanium
Standard Self Tapping Standard Self Tapping
10 104.010 104.210 Ti-104.010 Ti-104.210
12 104.012 104.212 Ti-104.012 Ti-104.212
14 104.014 104.214 Ti-104.014 Ti-104.214
16 104.016 104.216 Ti-104.016 Ti-104.216
18 104.018 104.218 Ti-104.018 Ti-104.218
20 104.020 104.220 Ti-104.020 Ti-104.220
22 104.022 104.222 Ti-104.022 Ti-104.222
24 104.024 104.224 Ti-104.024 Ti-104.224
26 104.026 104.226 Ti-104.026 Ti-104.226
28 104.028 104.228 Ti-104.028 Ti-104.228
30 104.030 104.230 Ti-104.030 Ti-104.230
35 104.035 104.235 Ti-104.035 Ti-104.235
40 104.040 104.240 Ti-104.040 Ti-104.240
45 104.045 104.245 Ti-104.045 Ti-104.245
50 104.050 104.250 Ti-104.050 Ti-104.250
55 104.055 104.255 Ti-104.055 Ti-104.255
60 104.060 104.260 Ti-104.060 Ti-104.260



Cancellous Bone Screw Ø 4.0mm, Full-thread
  • Profile:
  • Not to be used as lag screw.
  • Drill Bit: 2.5mm
Length in mm Code - S.S Code - Titanium
Standard Self Tapping Standard Self Tapping
10 105.010 105.210 Ti-105.010 Ti-105.210
12 105.012 105.212 Ti-105.012 Ti-105.212
14 105.014 105.214 Ti-105.014 Ti-105.214
16 105.016 105.216 Ti-105.016 Ti-105.216
18 105.018 105.218 Ti-105.018 Ti-105.218
18 105.018 105.218 Ti-105.018 Ti-105.218
20 105.020 105.220 Ti-105.020 Ti-105.220
22 105.022 105.222 Ti-105.022 Ti-105.222
24 105.024 105.224 Ti-105.024 Ti-105.224
26 105.026 105.226 Ti-105.026 Ti-105.226
28 105.028 105.228 Ti-105.028 Ti-105.228
30 105.030 105.230 Ti-105.030 Ti-105.230
35 105.035 105.235 Ti-105.035 Ti-105.235
40 105.040 105.240 Ti-105.040 Ti-105.240
45 105.045 105.245 Ti-105.045 Ti-105.245
50 105.050 105.250 Ti-105.050 Ti-105.250
55 105.055 105.255 Ti-105.055 Ti-105.255
60 105.060 105.260 Ti-105.060 Ti-105.260


Small Fragment Safety Lock Instruments Set
AS432 Small Fragment Safety Lock Instruments Set
Set Consisting of : Units
AS432.001 - Drill Bit Ø 2.8mm, Length 165mm, Calibrated, 2-flute, for Quick Coupling 2
AS432.005 - 2.8mm Drill Sleeve for 3.5mm Safety Lock Screws 2
AS432.009 - Torque Limiting Screw Driver, 2.5mm Tip 1
AS432.013 - T-Handle for Quick Coupling 1
AS432.017 - HSS Drill Bit Ø 2.5mm (Blue Coating) 2
AS432.021 - Extraction Screw (Left Hand Thread), Conical, for Screws Ø 3.5mm 1
AS432.025 - Centering Sleeve for Kirschner Wire Ø 1.2mm, Length 85mm 1
432.000 - Empty Container  
Optional Instruments (To be Ordered Separately)  
AS432.030 - Torque Limiting Screw Driver, 1.5mm Tip. 1
AS432.031 - Drill Bit Ø 2.0mm, Length 150mm, 2-flute for Quick Coupling 1
AS432.035 - 2.0mm Drill Sleeve for 2.4/2.7mm Safety Locking Screws 1

Small Fragment Instrument Set Combo With Standard Instruments & Locking Instruments.
AS140 Small Fragment Instrument Set Combo With Standard Instruments & Locking Instruments.
Set Consisting of : Units
Standard Instruments  
260.250 - Drill Bit 2.5mm Dia 2
260.350 - Drill Bit 3.5mm Dia 2
305.020 - Counter Sink for 3.5, 4.0mm Screws (6.0mm Head) 1
264.025 - Tap of 3.5mm Cortex Screw 2
264.038 - Tap of 4.0mm Cancellous Screw 2
306.010 - Quick Coupling Handle (T-Type) 1
307.060 - Drill & Tap Sleeve Combined 3.5/2.5mm 1
307.090 - Insert Drill Sleeve 2.5mm / 3.5mm 1
301.060 - Small Hexagonal Screw Driver Shaft 1
301.040 - Small Hexagonal Screw Driver 1
303.010 - Depth Gauge Small 1
302.010 - Small Plate Bender for Plates 2.7 & 3.5mm 1
340.020 - Self Centering Bone Holding Forceps- 190mm 1
379.015 - Hohman Retractors, Small, 8mm Wide, 160mm 2
381.012 - Periosteal Elevator, Straight/Curved 12mm 1
379.020 - Hohman Retractors, 15mm Wide, 160mm 2
341.025 - Reduction Forceps, Serrated - 140mm 1
342.035 - Reduction Forceps, Pointed - 140mm 1
304.010 - Neutral and Loaded Drill Guide (Small) 1
Locking Instruments  
AS432.001 - Drill Bit Ø 2.8mm, Length 165mm, Calibrated, 2-flute, for Quick Coupling 2
AS432.005 - 2.8mm Drill Sleeve for 3.5mm Safety Lock Screws 2
AS432.009 - Torque limiting Screw Driver, 2.5mm Tip 1
AS432.021 - Extraction Screw (Left Hand Thread), Conical, for Screws Ø 3.5mm 1
AS432.025 - Centering Sleeve for Kirschner Wire Ø 1.2mm, Length 85mm 1
AS140.000 - Empty Container  
Optional Instruments (To be Ordered Separately)  
AS432.030 - Torque Limiting Screw Driver, 1.5mm Tip. 1
AS432.031 - Drill Bit Ø 2.0mm, Length 150mm, 2-flute for Quick Coupling 1
AS432.035 - 2.0mm Drill Sleeve for 2.4/2.7mm Safety Locking Screws 1