Codes |
Set Consisting of: |
Units |
Q.077.01 |
Protection Sleeve |
1 |
Q.077.02 |
Guide Pin Sleeve Ø17.5 / Ø3.2
| 1 |
Q.077.03 |
Proximal Cannulated Drill Bit Ø17.5 / Ø3.2 |
1 |
Q.077.04 |
Quick Coupling Handle Ø8.0 |
1 |
Q.077.05 |
Adapter |
1 |
Q.077.06 |
Soft Tissue Protective Plate |
1 |
Q.077.07 |
Awl |
1 |
Q.077.08 |
Fracture Allignment Device (T-Type) |
1 |
Q.077.09 |
Ball Head Guide Pin Ø2.5/Ø4.0, Length 680mm |
2 |
Q.077.10 |
Guide Pin Handle |
1 |
Q.077-9.0 |
Flexible Reamer shaft with fixed Reamer Ø9.0mm |
1 |
Q.077-10.0 |
Flexible Reamer shaft with fixed Reamer Ø10.0mm |
1 |
Q.077-11.0 |
Flexible Reamer shaft with fixed Reamer Ø11.0mm |
1 |
Q.077-12.0 |
Flexible Reamer shaft with fixed Reamer Ø12.0mm |
1 |
Q.077-13.0 |
Flexible Reamer shaft with fixed Reamer Ø13.0mm |
1 |
Q.077.16 |
Handle |
1 |
Q.077.17 |
Connect Screw Nut 7/16" -20 SWS |
2 |
Q.077.18 |
Connect Screw Wrench SWS-0 |
1 |
Q.077.19 |
Impactor connector with Rod 7/16" -20 |
1 |
Q.077.21 |
Open Wrench SW11 |
1 |
Q.077.22 |
Nail Removal Rod 7/16" -20 |
1 |
Q.077.23 |
Hammer |
1 |
Q.077.24 |
Proximal Guide Rod |
1 |
Q.077.25 |
Lock Wheel for Guide Rod m8x1 |
1 |
Q.077.26 |
Proximal Drill Sleeve Ø18/Ø11.2/Ø8.2 x 190 |
1 |
Q.077.27 |
Guide Pin Sleeve Ø11.2/Ø3.2 |
1 |
Q.077.28 |
Threaded Guide Pin Ø3.2 x 343 |
5 |
Q.077.29 |
Depth Gauge Ø3.2 (343-190) |
1 |
Q.077.30 |
Proximal Cortical Drill Bit Ø7.0/Ø8.2mm |
1 |
Q.077.31 |
Proximal Drill Bit Ø7.0 /Ø8.2mm |
1 |
Q.077.32 |
Proximal Position Rod Ø8.2/ Ø7.0mm |
1 |
Q.077.33 |
Proximal Cortical Cannulated Drill Bit Ø3.2/ Ø11.0/ Ø11.2mm |
1 |
Q.077.34 |
Proximal Cortical Cannulated Drill Bit Ø3.2/ Ø11.0/ Ø11.2mm with Limitation |
1 |
Q.077.35 |
Limitation |
1 |
Q.077.36 |
Proximal Locking Screw Cannulated Tap Ø3.2/ Ø11.0mm |
1 |
Q.077.37 |
Proximal Screw Wrench (2.55/3.05) |
1 |
Q.077.38 |
Proximal Screw Holder (M4.5/SW3.0) |
1 |
Q.077.39 |
Limitation Wrench SW3.0 |
1 |
Q.077.40 |
Proximal Screw Compression Nut |
1 |
Q.077.41 |
Anti-Rotation Screw Wrench SW4.5 |
1 |
Q.077.42 |
Screw Driver for Locked Nut SW4.5 |
1 |
Q.077.43 |
Distal Guide Rod 180mm/ 240mm |
1 |
Q.077.44 |
Distal Guide Rod 200mm |
1 |
Q.077.45 |
Distal Guide Rod State 90° 180/200/240 |
1 |
Q.077.46 |
Guide Lock Wheel M8x1 |
3 |
Q.077.47 |
Distal Lock Screw Sleeve Ø11/ Ø8.2mm |
1 |
Q.077.48 |
Distal Lock Screw Drill Sleeve Ø8.2/ Ø4.3mm |
1 |
Q.077.49 |
Sleeve Pin Ø4.3mm |
1 |
Q.077.50 |
Drill Bit Ø4.3mm |
3 |
Q.077.51 |
Limitation Ø4.3/ SW3.0 |
1 |
Q.077.52 |
Depth Gauge Ø3.2 (343-190) |
1 |
Q.077.53 |
Screw Driver SW4.0 for Distal Locking Screw |
1 |
Q.077.54 |
Screw Driver SW8.0 for connect screw |
1 |
Q.077.55 |
Screw Driver SW4.5 for End Cap |
1 |
Q.077.56 |
Guide Pin with Hook Ø2.8mm |
1 |
Q.077.57 |
Clean Guide Pin Ø3.0mm |
1 |
Q.077.000 |
Empty Container |
1 |