Hybrid Fixator Assembly
Hybrid Fixator Assembly
Code No.: Q.140.500
Consisting of : 1 2/3 Ring,
2 Two-Hole X-Wire Securing Pins,
2 Three-Hole Wire Clamp Slider Units,
1 ProCallus Central Body,
1 ProCallus Straigth Clamp,
1 Hybrid Coupling with Ball-Joint, 2 Posts,
2 Supplementary Screw Holder Bars,
4 Supplementary Screw Holder Clamps.

Sheffield Ring Fixator Assembly For Trauma
Sheffield Ring Fixator Assembly For Trauma
Code No.: Q.140.509
Consisting of : 2 2/3 Rings,
2 Two-Hole Securing Pins,
2 Three-Hold Wire Clamp Slider Units,
1 Sheffield Clamp,
3 Reduction Units

Sheffield Ring Fixator Assembly For Reconstruction
Sheffield Ring Fixator Assembly For Reconstruction
Code No.: Q.140.515
Consisting of : 2 1/3 Rings,
4 Locking Screws,
1 Sheffield Clamp,
2 Hinge CLamps, 4 Threaded Bars and 8 Nuts and Washer,
1 Compression-Distraction Cliker Unit, 2 Extension Plates and 2 Single Screw Clamps.

1/3 Rings (Not Illustrated)
Item Code Inner Dia. in mm
Q.140.101 125
Q.140.103 150
Q.140.105 175
Q.140.107 190
Q.140.109 220

1/3 Radiolucent Rings
Item Code Inner Dia. in mm
Q.140.011 125
Q.140.013 150
Q.140.015 175
Q.140.017 190
Q.140.109 220

2/3 Rings
Item Code Inner Dia. in mm
Q.140.021 125
Q.140.023 150
Q.140.025 175
Q.140.027 190
Q.140.129 220

2/3 Radiolucent Rings (Not Illustrated)
Item Code Inner Dia. in mm
Q.140.031 125
Q.140.033 150
Q.140.035 175
Q.140.037 190
Q.140.139 220

Q.140.530 - Ring Locking Screw

To join 1/3 and 2/3 rings together (two locking screws are necessary)


Q.140.043 - Foot Ring Inner Ø 150mm

For wire fixation of the foot


Q.140.045 - Independent Wire Clamp

Q.140.047 - Two-Hole X-Wire Securing Pin

Q.140.049 - Hybrid Coupling With Ball-Joint

Q.140.053 - Ring Clamp

Q.140.051 - Supplementary Screw Holder Clamp

Q.140.055 - Three-Hold Wire Clamp Slider Unit

Should be used with 1 or 2 wires only.


Q.140.057 - Supplementary Screw Holder

Bar and Clamp, sterile


X-Wire Without Olive
Length in mm Dia. in mm Item - Code Stainless Steel
400 2 Q.140.059
450 2 Q.140.061
400 1.8 Q.140.063

X-Wire With Lateral Olive
Length in mm Dia. in mm Item - Code Stainless Steel
310 2 Q.140.065
350 2 Q.140.067
400 2 Q.140.069

X-Wire With Central Olive
Length in mm Dia. in mm Item - Code Stainless Steel
400 2 Q.140.071
450 2 Q.140.073
400 2 Q.140.075

Posts
Item Code Inner Dia. in mm
Q.140.077 50
Q.140.079 100
Q.140.081 150

Q.140.083 - Single Screw Clamp

Q.140.085 - Hinge Clamp

Allows variable attachment of the frame for deformity correction. It can also be used as a clamp to secure a screw or wire.


Q.140.087 - Extension Plate

Allows variable attachments of components (e.g. binge clamp, angulated wire) to the ring.


Q.140.089 - Translation Rotation Hinge

Enables translation or rotation between two rings for the treatment of deformity. Radiolucent centre allows X-ray targeting of axis.


Q.140.091 - Counter Nut

Used for better control of lengthening or as a part of a motor for angular deformity correction.


Threaded Bars With Nuts And Washers (Set of 3)
Item Code Inner Dia. in mm
Q.140.099 80
Q.140.101 120
Q.140.103 160
Q.140.105 200

Q.140.093 - Bolts - Length 60mm

with nuts and washers (set of 3)


Compression-Distraction Clicker Units
Code No. Description
Q.140.095 Standard, Extends to 4cm
Q.140.097 Long, Extends to 8cm

Q.140.107 - Reduction Unit

3 units are required to connect 2 rings.


Hybrid Fixator Assembly Kits Standard
Code No. Description
Q.140.109 Hybrid Fixator Assembly Kits - Standard
Q.140.111 D.A.F. Standard Central Body
Q.140.113 Compression-Distraction Unit Standard Extends to 4cm
Q.140.115 D.A.F. Straight Clamp
Q.140.117 Hybrid Coupling with Ball-Joint

Hybrid Fixator Assembly Kits Short
Code No. Description
Q.140.119 Hybrid Fixator Assembly Kits - Short
Q.140.121 D.A.F. Short Central Body
Q.140.123 Compression-Distraction Unit Short Extends to 2.75cm
Q.140.125 D.A.F. Straight Clamp
Q.140.127 Hybrid Coupling with Ball-Joint

Q.151 Standard Trauma Kit For All Normal Trauma Indications
Code No. Set Consisting of: Units
Q.151.001 Wire Tensioner 1
Q.151.003 Wire Guide 1
Q.151.005 Cortical Screw, Shaft Ø 6 mm, Thread Ø 6-5 mm, 130/40 mm 6
Q.151.007 Cortical Screw, Shaft Ø 6 mm, thread Ø 6-5 mm, 150/40 mm 6
Q.151.009 Drill Bit Kit Ø 4.8mm 1
Q.151.011 Allen Wrench 6 mm 1
Q.151.013 Screw Guide, Length 80 mm 3
Q.151.015 Screw Guide, Length 100 mm 3
Q.151.017 Drill Guides Ø 4.8 mm, length 80 mm 1
Q.151.019 Wire Cutter 1
Q.151.021 Two-Hole X-Wire securing Pin 2
Q.151.023 Three-Hole Wire Clamp Slider Unit 3
Q.151.025 Clamp 1
Q.151.027 Extension Plate 2
Q.151.029 X-Wire with lateral olive, length 310 mm 4
Q.151.031 X-Wire with lateral olive, length 350 mm 4
Q.151.033 X-Wire with lateral olive, length 400 mm 4
Q.151.035 X-Wire with central olive, length 400 mm 4
Q.151.037 X-Wire with central olive, length 450 mm 4
Q.151.039 X-Wire without olive, length 400 mm 4
Q.151.041 X-Wire without olive, length 450 mm 4
Q.151.043 2/3 Ring, Inner Ø 125 mm 2
Q.151.045 2/3 Ring, Inner Ø 150 mm 2
Q.151.047 2/3 Ring, Inner Ø 175 mm 2
Q.151.049 2/3 Ring, Inner Ø 190 mm 2
Q.151.051 2/3 Ring, Inner Ø 220 mm 2
Q.151.053 1/3 Ring, Inner Ø 125 mm 2
Q.151.055 1/3 Ring, Inner Ø 150 mm 2
Q.151.057 1/3 Ring, Inner Ø 175 mm 2
Q.151.059 1/3 Ring, Inner Ø 190 mm 2
Q.151.061 1/3 Ring, Inner Ø 220 mm 2
Q.151.063 Ring Locking Screw 4
Q.151.065 Hinge Clamp 2
Q.151.067 Open End Wrench 10MM 2
Q.151.069 Single Screw Clamp 2
Q.151.071 Reduction Unit 3
Q.151.073 Universal Allen Wrench 1

Q.152 Lengthening And Corection Of Deformities Kit Use With The Standard Trauma Kit For Reconstraction Indications
Code No. Set Consisting of: Units
Q.152.001 Standard Compression-Distraction Clicker Unit 3
Q.152.003 Long Compression-Distraction Clicker Unit 3
Q.152.005 Cortical Screw, Shaft Ø 6 mm, Thread Ø 6-5 mm, 130/40 mm 3
Q.152.007 Cortical Screw, sahft Ø 6 mm, thread Ø 6-5 mm, 150/40 mm 3
Q.152.009 Three-Hole Wire Clamp Slider Unit 3
Q.152.011 Two-Hole X-Wire securing Pin 2
Q.152.013 Sheffield Clamp 1
Q.152.015 Extension Plate 4
Q.152.017 Ring Locking Screw 4
Q.152.019 Hing Clamp 4
Q.152.021 Translation Rotation Hinge 3
Q.152.023 Single Screw Clamp 4

Q.153 Cross Joint And Foot Fixation System Used With The Standard Trauma Kit And Lengthening And Correction Of Deformities Kit For Extended Reconstruction Indications, Including Cross Joint And Foot Fixation
Code No. Set Consisting of: Units
Q.153.001 Standard Compression-Distraction Clicker Unit 3
Q.153.003 Long Compression-Distraction Clicker Unit 3
Q.153.005 Cortical Screw, Shaft Ø 6 mm, Thread Ø 6-5 mm, 130/40 mm 3
Q.153.007 Cortical Screw, sahft Ø 6 mm, thread Ø 6-5 mm, 150/40 mm 3
Q.153.009 Three-Hole Wire Clamp Slider Unit 2
Q.153.011 Two-Hole X-Wire securing Pin 2
Q.153.013 Sheffield Clamp 1
Q.153.015 Extension Plate 2
Q.153.017 Ring Locking Screw 2
Q.153.019 Hing Clamp 2
Q.153.021 Single Screw Clamp 2

Q.440 - Hybrid Fixation System Sterilization Box
Code No. Set Consistimg of Units
Q.440.001 Tray 3
Q.440.003 2/3 Ring, inner Ø 150 mm 3
Q.440.005 1/3 Ring, inner Ø 150 mm 2
Q.440.007 2/3 Ring, inner Ø 190 mm 2
Q.440.009 2/3 Ring, inner Ø 190 mm 2
Q.440.011 Ring Locking Screw 8
Q.440.013 Two-Hole X-Wire Securing Pin 8
Q.440.015 Three-Hole Wire Clamp Slider Unit 8
Lower Tray Consisting of:
Q.440.017 Wire Guide 1
Q.440.019 Wire Tensioner 1
Q.440.021 Hybrid Fixxator Standard Assembly Kit Consisting of: 1 set
  1 D.A.F. Standard Central Body  
  1 Compression-Distraction Unit Standard  
  1 D.A.F. Straight Clamp  
  1 Hybrid Coupling with Ball-Joint  
Q.440.023 Wire Cutter 1
Q.440.025 Suppliementary Screw Holder Clamp 8
Upper Tray Consisting of:
Q.440.027 Allen Wrench 6 mm 2
Q.440.029 Allen Wrench 5 mm 2
Q.440.031 Allen Wrench 3 mm 2
Q.440.033 Independent Wire Clamp 2
Q.440.035 Post, length 50 mm 3
Q.440.037 Post, length 100 mm 3
Q.440.039 Post, length 150 mm 3
Q.440.041 X-Wire with lateral olive Ø2 mm, length 400 mm 8
Q.440.043 X-Wire with central olive Ø2 mm, length 400 mm 4
Q.440.045 X-Wire with central olive Ø2 mm, length 450 mm 4
Q.440.047 X-Wire without olive Ø2 mm, length 400 mm 4
Q.440.049 X-Wire without olive Ø2 mm, length 450 mm 4

Q.441 - Hybrid Fixation System Sterilization Box
Code No. Set Consistimg of Units
Q.441.001 Tray 3
Q.441.003 2/3 Ring, inner Ø220 mm 2
Q.441.005 1/3 Ring, inner Ø220 mm 2
Q.441.007 2/3 Ring, inner Ø175 mm 2
Q.441.009 1/3 Ring, inner Ø175 mm 2
Lower Tray Consisting of:
Q.441.011 Clamp 2
Q.441.013 Single Screw Clamp 2
Q.441.015 Reduction Unit 3
Q.441.017 Screw Guide, length 80mm 3
Q.441.019 Screw Guide, length 100 mm 3
Q.441.021 Drill Guide Ø4.8 mm, length 80 mm 1
Q.441.023 Drill Guide Ø4.8 mm, length 60 mm 1
Q.441.025 Bolts 60 mm (set of 3) 1
Q.441.027 Threaded Bars, length 80 mm (set of 3) 1
Q.441.029 Threaded Bars, length 120 mm (set of 3) 1
Q.441.031 Threaded Bars, length 160 mm (set of 3) 1
Q.441.033 Threaded Bars, length 200 mm (set of 3) 1
Upper Tray Consisting of:
Q.441.035 Wire Tensioner 1
Q.441.037 Ring Locking screw 8
Q.441.039 Two-Hole X-Wire Securing Pin 8
Q.441.041 Hybrid fixator Short Assembly Kit Consisting of : 1 set
  1 D.A.F. Straigth Clamp  
  1 D.A.F. Short Central Body  
  1 Compression-Distraction Unit Short  
  1 Hybrid Coupling with Ball-Joint  
Q.441.043 Reduction Unit 3
Q.441.045 Three-Hole Wire Clamp Slider Unit 8