AS027 Instruments Set For 7.3mm Cancellous Cannulated Screws | ||
Codes | Set Consisting of : | Units |
703.030 | Cannulated Drill Bit with Protector 5.0mm x 250mm | 1 |
703.031 | Cannulated Tap 7.3mm x 250mm | 1 |
703.032 | Protection Sleeve with Drill Guide Wire 5mmx10mm | 1 |
703.033 | Adjustable Guide | 1 |
703.034 | Direct Measuring Device | 1 |
703.035 | Guide Wire with Threaded Tip 2.5mm Dia x 230mm | 3 |
703.036 | Cannulated Hexagonal Screw Driver 4.0mm Tip | 1 |
703.037 | Cleaning Pin 2.5mm x 280mm | 1 |
703.038 | Cannulated Counter Sink 8mm | 1 |
703.039 | Wrench for Protector 3mm | 1 |
703.040 | Screw Driver with Screw Holding Sleeve 4.0mm Tip | 1 |
703.041 | Parallel Guide Adjustable | 1 |
703.042 | Drill Guide with Dilator for 5.0mm Cannulated Drill Bit | 1 |
703.043 | Screw Holding Forcepss | 1 |
703.044 | Guide Pin 2.5mm x 230mm | 3 |
027.000 | Empty Container with Screw Rack |
Q.027 Instruments Set For 7.3mm Cancellous Cannulated Screws - Q Series | ||
Codes | Set Consisting of : | Units |
Q.027.03 | Direct Measuring Device for 7.3mm Cancellous Cannulated Screws | 1 |
Q.027.06 | Threaded Guider Wire 2.5mm | 4 |
Q.027.12 | Cannulated Drill Bit with Limited Block 5.0mm | 1 |
Q.027.15 | Cannulated Countersink F9mm | 1 |
Q.027.18 | Hex Key | 1 |
Q.027.39 | Parallel Guide for Guide Wires, adjustable | 1 |
Q.027.21 | Wrench (for Parallel Guide for Guide Wires, Adjustable) | 1 |
Q.027.24 | Parallel Guide for Guide Wires 2.5mm | 1 |
Q.027.27 | Cannulated Tap 7.3mm | 1 |
Q.027.30 | Screwdriver Hexagonal 4.0mm Tip | 1 |
Q.027.33 | Cleaning Stylet 2.5mm | 1 |
Q.027.36 | Protection Sleeve with Drill Sleeve & Guide Wire Sleeve | 1 |
Q.027.42 | Cannulated Screwdriver Hexagonal 4.0mm | 1 |
Q.027.000 | Empty Container |
Medical grade malleable light weight metal splints.