AS026 Instruments Set For 6.5mm Cancellous Cannulated Screws | ||
Codes | Set Consisting of : | Units |
703.010M | Cannulated Drill Bit with Protector 4.5mm x 230mm | 1 |
703.021 | Cannulated Tap 6.5mm x 230mm | 1 |
703.012M | Protection Sleeve with Drill Guide Wire 4.5mmx10mm | 1 |
703.013M | Adjustable Guide | 1 |
703.014M | Direct Measuring Device | 1 |
703.015 | Guide Wire with Threaded Tip 2.0mm Dia x 230mm | 3 |
703.016 | Cannulated Hexagonal Screw Driver 3.5mm Tip | 1 |
703.017M | Cleaning Pin 2.0mm x 280mm | 1 |
703.018 | Cannulated Counter Sink 8mm | 1 |
703.019 | Wrench for Protector 3mm | 1 |
703.020M | Screw Driver with Screw Holding Sleeve 3.5mm Tip | 1 |
703.022M | Parallel Guide Adjustable | 1 |
703.023 | Drill Guide with Dilator for 4.5mm Cannulated Drill Bit | 1 |
703.024 | Screw Holding Forceps | 1 |
703.025 | Guide Pin 2.0mm x 230mm | 3 |
900.052 | Empty Container with Screw Rack |
Q.026 Instruments Set For 6.5MM Cancellous Cannulated Screws - Q Series | ||
Codes | Set Consisting of : | Units |
Q.026.03 | Direct Measuring Device for 6.5mm Cancellous Cannulated Screws | 1 |
Q.026.06 | Threaded Guider Wire 2.0mm | 4 |
Q.026.12 | Cannulated Drill Bit with Limited Block 4.5mm | 1 |
Q.026.15 | Cannulated Countersink F9mm | 1 |
Q.026.18 | Hex Key | 1 |
Q.026.39 | Parallel Guide for Guide Wires, adjustable | 1 |
Q.026.21 | Wrench (for Parallel Guide for Guide Wires, Adjustable) | 1 |
Q.026.24 | Parallel Guide for Guide Wires 2.0mm | 1 |
Q.026.27 | Cannulated Tap 6.5mm | 1 |
Q.026.30 | Screwdriver Hexagonal 3.5mm Tip | 1 |
Q.026.33 | Cleaning Stylet 2.0mm | 1 |
Q.026.36 | Protection Sleeve with Drill Sleeve & Guide Wire Sleeve | 1 |
Q.026.42 | Cannulated Screwdriver Hexagonal 3.5mm Tip | 1 |
Q.026.000 | Empty Container |
Medical grade malleable light weight metal splints.